Corte y sellado reversible de dientes para obtener superficies internas de esmalte incólumes
Type
Artículo de revista
Document language
EspañolPublication Date
2015-07-01Metadata
Show full item recordSummary
Las superficies internas de los dientes, que se obtienen por cortes con discos, están generalmente desorganizadas por los giros, la velocidad y la rugosidad del disco. El calor altera la superficie y el agua de la refrigeración la composición química porque disuelve los componentes. En estudios de difusión, el perfil se borra por el corte, lo que anula resultados. Objetivo: desarrollar un método de sellado de superficies internas, ya cortadas antes de los ensayos de difusión, sin dejar trazas químicas o partículas. Materiales y metedos: se probó in vitro la habilidad de cuatro materiales de sellado con 40 especimenes, provenientes de 20 coronas de terceros molares, cortadas sagitalmente. Los especímenes se distribuyeron aleatoriamente en cuatro grupos (n = 10): G1: Teflón (Topex®), G2: Tela de caucho (Dental DAM®), G3: película de cloruro de polivinilo (Vinilpel®) y G4: Cinta aislante (Tesa®). Se usó una solución de azul de metileno (AM) al 2% por 6 días como indicadora de filtración. Por observación visual de cada muestra, se le asignó un valor (sí o no) dependiendo de la presencia o ausencia de cualquier punto MB sobre la superficie de sellado. Los resultados fueron analizados siguiendo un modelo estadístico de respuesta binomial. Resultados: Siguiendo los procedimientos descritos, el teflón es el único material que previene la filtración de AM en la superficie interna expuesta por el corte. Conclusión: Se propone un protocolo de sellado reversible de las superficies internas con teflón, previo al corte de los dientes, para no alterar los resultados experimentales.Summary
Teeth inner surfaces obtained by cutting with discs are greatly disorganized because of turns, speed and the rugosity of the disc. The heat alters the undisturbed structure and the chemical composition is upset because the refrigeration water dissolves soluble components. In diffusion studies the profile is defaced by cutting which voids results. Objective: to develop a method for sealing already cut inner surfaces prior to diffusion assay without leaving chemical or particle traces. Materials and methods: The in vitro aptitude of four materials for reversible sealing was assessed with 20 human third molar crowns cut sagitally into 40 specimens that were randomly divided into four groups (n=10) : G1 Teflon (Topex®) , G2 Rubber fabric (Dental DAM®), G3 polyvinyl chloride film (Vinilpel®) , G4 insulating tape (Tesa®). A 2% methylene blue (MB) solution was used for 6 days as an indicator of infiltration. By visual observation each specimen was assigned a value (yes or no) dependent on the presence or absence of any MB spots on the sealed surface and results analyzed following a statistical model of binomial response. Results: Following the described procedure, teflon is the only material that prevented the infiltration of MB into the inner surfaces exposed by cutting. Conclusions: A protocol for the reversible sealing of inner teeth surfaces with Teflon allows for the previous cutting of the teeth so as not to alter experiment results.Keywords
Collections
