Mostrar el registro sencillo del documento

dc.rights.licenseAtribución-SinDerivadas 4.0 Internacional
dc.contributor.advisorTakeuchi, Caori Patricia
dc.contributor.authorGamba Tiusaba, Cesar Fernando
dc.date.accessioned2020-06-18T20:07:41Z
dc.date.available2020-06-18T20:07:41Z
dc.date.issued2020
dc.identifier.urihttps://repositorio.unal.edu.co/handle/unal/77673
dc.description.abstractThe present Thesis studies an alternative to perform a properly reinforcement in one side of bearing walls, built with masonry units of horizontal perforation # 5, the aim of this reinforcement is to increase the stiffness, capacity and to avoid the typical failure in this kind of walls. Also, it was searched, an reinforcement that does not require a expensive construction machinery, skilled labor and built with commonly used material.
dc.description.abstractEn la presente tesis, se estudió una alternativa de reforzamiento en una sola cara para mamposteria simple con unidades de perforación horizontal #5, para aumentar la capacidad, la rigidez y evitar la falla típica de este tipo de muros, También se buscó un reforzamiento que no requiriera mano de obra altamente calificada ni equipos de construcción costosos y que además utilizara materiales de uso común.
dc.format.extent87
dc.format.mimetypeapplication/pdf
dc.language.isospa
dc.rightsDerechos reservados - Universidad Nacional de Colombia
dc.rights.urihttp://creativecommons.org/licenses/by-nd/4.0/
dc.subject.ddc620 - Ingeniería y operaciones afines::624 - Ingeniería civil
dc.titleReforzamiento por una cara de muros de mampostería de arcilla con unidades de perforación horizontal
dc.typeOtro
dc.rights.spaAcceso abierto
dc.type.driverinfo:eu-repo/semantics/other
dc.type.versioninfo:eu-repo/semantics/acceptedVersion
dc.publisher.programBogotá - Ingeniería - Maestría en Ingeniería - Estructuras
dc.contributor.researchgroupAnálisis, diseño y materiales - GIES
dc.description.degreelevelMaestría
dc.publisher.branchUniversidad Nacional de Colombia - Sede Bogotá
dc.relation.referencesAsociación Colombiana de Ingeniería Sísimica (AIS). (2001). Manual de construcción, evaluación y rehabilitación sismo resistente de viviendas de mampostería.
dc.relation.referencesBartolom, A. S., Mor, A. C., & Per, L. D. E. L. (2002). REPARACIÓN DE UN MURO DE ALBAÑILERÍA CONFINADA, 1–8.
dc.relation.referencesBhattacharya, S., Nayak, S., & Dutta, S. C. (2014). A critical review of retrofitting methods for unreinforced masonry structures. International Journal of Disaster Risk Reduction, 7, 51–67. https://doi.org/10.1016/j.ijdrr.2013.12.004
dc.relation.referencesCaori Patricia Takeuchi. (2010). Comportamiento en la mamposteria estructural.
dc.relation.referencesChuang, S., Zhuge, Y., & Mcbean, P. C. (2004). 13 th World Conference on Earthquake Engineering SEISMIC RETROFITTING OF UNREINFORCED MASONRY WALLS BY CABLE SYSTEM, (3228).
dc.relation.referencesDávila, D. T. (2011). REFUERZO DE MUROS Y TABIQUES DE ALBAÑILERÍA CON MALLAS DE POLÍMERO.
dc.relation.referencesDíaz, B. (2003). Vulnerabilidad y riesgo sísmico de edificios aplicación a entornos urbanos en zonas de amenaza alta i moderada. TDX (Tesis Doctorals En Xarxa). Retrieved from https://upcommons.upc.edu/handle/2117/93542
dc.relation.referencesHamburger, R. O. (2006). Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications, ANSI/AISC 358-05. Structures Congress 2006@ SStructural Engineering and Public Safety, (1), 1–8. https://doi.org/10.1061/40889(201)5
dc.relation.referencesJesús Humberto Arango. (2001). Edificios altos de mampostería en arcilla. Jesús Humberto Arango, 105.
dc.relation.referencesMilton Mena Serna, et al. (2019). DISEÑO, CONSTRUCCIÓN Y CRITERIOS DE SUPERVISIÓN DE EDIFICACIONES EN MAMPOSTERÍA ESTRUCTURAL SEGÚN LA NSR-10 (Editorial). Bogotá.
dc.relation.referencesNSR-10. (2010). NSR-10.
dc.relation.referencesOscar Javier Ortiz, S. (2020). Determinación de las características mecánicas de muretes de mampostería simple reforzados con malla de acero y conectores transversales sometidos a carga axial y tensión diagonal.
dc.relation.referencesSanta-maria, H., Duarte, G., & Garib, A. (2004). 13 th World Conference on Earthquake Engineering EXPERIMENTAL INVESTIGATION OF MASONRY PANELS EXTERNALLY STRENGTHENED WITH CFRP LAMINATES AND FABRIC SUBJECTED TO IN-PLANE SHEAR LOAD, (1627).
dc.relation.referencesShrestha, H., Pradhan, S., & Guragain, R. (2012). Experiences on Retrofitting of Low Strength Masonry Buildings by Different Retrofitting Techniques in Nepal. 15th World Conference on Earthquake Engineering, Lisbon Portugal, (January 2006).
dc.relation.referencesSuaréz, M. del R. P. (2004). Modalidades de refuerzo para mampostería con aceros con esfuerzo de fluencia de 6000 kg/cm2. Sociedad Mexicana de Ingeniería Estructural, (315), 1–10.
dc.relation.referencesTorres, J. (2009). COMPORTAMIENTO DE MUROS DE MAMPOSTERÍA CON ELEMENTOS DE BORDE CONFINADOS CON PLATINAS EN EL MORTERO DE PEGA, 64. https://doi.org/10.1016/j.clinbiochem.2008.04.008
dc.relation.referencesTumialan, J. G., Bartolome, A. S., & Gumpertz, S. (2007). Comportamiento sísmico de tabiques reforzados con varillas de fibra de vidrio.
dc.relation.referencesViviana, I. N. G., & Rougier, C. (2007). REFUERZO DE MUROS DE MAMPOSTERÍA CON MATERIALES COMPUESTOS.
dc.rights.accessrightsinfo:eu-repo/semantics/openAccess
dc.subject.proposalMampostería
dc.subject.proposalMasonry
dc.subject.proposalReinforcement
dc.subject.proposalDuctilidad
dc.subject.proposalReforzamiento
dc.subject.proposalDuctility
dc.subject.proposalUnidad de mampostería número cinco
dc.subject.proposalMasonry unit number five
dc.type.coarhttp://purl.org/coar/resource_type/c_1843
dc.type.coarversionhttp://purl.org/coar/version/c_ab4af688f83e57aa
dc.type.contentText
oaire.accessrightshttp://purl.org/coar/access_right/c_abf2


Archivos en el documento

Thumbnail
Thumbnail

Este documento aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del documento

Atribución-SinDerivadas 4.0 InternacionalEsta obra está bajo licencia internacional Creative Commons Reconocimiento-NoComercial 4.0.Este documento ha sido depositado por parte de el(los) autor(es) bajo la siguiente constancia de depósito