Mostrar el registro sencillo del documento

Optimización de la carga admisible a tracción y la hermeticidad en el diseño de una conexión roscada API 3 1/2 NU a través de técnicas metaheurísticas y análisis de elementos finitos

dc.rights.licenseAtribución-NoComercial 4.0 Internacional
dc.contributor.advisorGuzmán Pardo, María Alejandra
dc.contributor.advisorGaleano Urueña, Carlos Humberto
dc.contributor.authorDíaz León, David Leonardo
dc.date.accessioned2020-09-04T16:41:47Z
dc.date.available2020-09-04T16:41:47Z
dc.date.issued2020-07-12
dc.identifier.urihttps://repositorio.unal.edu.co/handle/unal/78383
dc.description.abstractEn el presente trabajo se optimiza la resistencia de carga a tracción y hermeticidad de una conexión roscada API 3 1/2 NU, adaptando su geometría inicial y realizando cambios dimensionales de la conexión a través de una rutina de optimización con algoritmos metaheurísticos, evaluando el desempeño mediante el método de elementos finitos.
dc.description.abstractIn this paper, the tensile load resistance and hermeticity of an API 3 1/2 NU threaded connection are optimized, adapting its initial geometry and making dimensional changes of the connection through an optimization routine with metaheuristic algorithms, evaluating the performance using the finite element method.
dc.format.extent73
dc.format.mimetypeapplication/pdf
dc.language.isospa
dc.rightsDerechos reservados - Universidad Nacional de Colombia
dc.rights.urihttp://creativecommons.org/licenses/by-nc/4.0/
dc.subject.ddc620 - Ingeniería y operaciones afines
dc.subject.ddc629 - Otras ramas de la ingeniería
dc.subject.ddc510 - Matemáticas
dc.titleOptimización de la carga admisible a tracción y la hermeticidad en el diseño de una conexión roscada API 3 1/2 NU a través de técnicas metaheurísticas y análisis de elementos finitos
dc.typeOtro
dc.rights.spaAcceso abierto
dc.type.driverinfo:eu-repo/semantics/other
dc.type.versioninfo:eu-repo/semantics/acceptedVersion
dc.publisher.programBogotá - Ingeniería - Maestría en Ingeniería - Ingeniería Mecánica
dc.description.degreelevelMaestría
dc.publisher.branchUniversidad Nacional de Colombia - Sede Bogotá
dc.relation.referencesS. Mohr, J. Wang, G. Ellem, J. Ward, and D. Giurco, “Projection of world fossil fuels by country,” Fuel, vol. 141, pp. 120–135, 2015.
dc.relation.referencesJ. Bellarby, ed., Well Completion Design, vol. 56 of Developments in Petroleum Science. Elsevier, 2009.
dc.relation.referencesJ. Van Wittenberghe, J. De Pauw, P. De Baets, W. De Waele, W. Ost, G. De Roeck, and T. Bui, “Fatigue investigation of threaded pipe connections,” Sustainable Construction and Design, vol. 1, no. 1, p. 182, 2010.
dc.relation.referencesTenaris, “La importancia de los tubos en la industria energética.” [Online]. Disponible en: http://www.tenaris.com/~/media/Files/ProductLiterature/Institutional/ WPM_ESPNew.ashx?sc_lang=es-ES, Abril 2013. Accedido 06-05-2018.
dc.relation.referencesD. A. Parra Contreras and O. J. Maldonado Torrado, Estudio de prefactibilidad para la creación de una empresa de fabricación de conexiones API y PREMIUM en tuber´ıas de producción para el sector de OIL & GAS. Pgdip project, Universidad Nacional de Santander, Bucaramanga, Colombia, 2016.
dc.relation.referencesY. Hirano, T. Maguchi, K. Kobayashi, K. Yamamoto, K. Ueno, and J. Duxbury, “De- velopment of premium threaded connection “FOX”,” Tech. Rep. 19, Kawasaki Steel, 1988.
dc.relation.referencesA. Assanelli and E. Dvorkin, “Finite element models of octg threaded connections,” Computers & Structures, vol. 47, no. 4, pp. 725–734, 1993.
dc.relation.referencesK. Macdonald and W. Deans, “Stress analysis of drillstring threaded connections using the finite element method,” Engineering Failure Analysis, vol. 2, no. 1, pp. 1–30, 1995.
dc.relation.referencesI. Elinger and K. Váradi, “Shape optimization of threaded plastic caps by FEM,” Perio- dica Polytechnica, Mechanical Engineering, vol. 39, no. 3-4, pp. 211–224, 1995.
dc.relation.referencesJ.-J. Chen and Y.-S. Shih, “A study of the helical effect on the thread connection by three dimensional finite element analysis,” Nuclear Engineering and Design, vol. 191, no. 2, pp. 109–116, 1999.
dc.relation.referencesA. Yamamoto, “The theory and computation of thread connection,” Youkendo, Tokyo, 1980.
dc.relation.referencesY. Guangjie, Y. Zhenqiang, W. Qinghua, and T. Zhentong, “Numerical and experimen- tal distribution of temperature and stress fields in API round threaded connection,” Engineering Failure Analysis, vol. 13, no. 8, pp. 1275–1284, 2006.
dc.relation.referencesJ. Van Wittenberghe, P. de baets, J. Degrieck, and W. De Waele, “Fatigue behaviour of threaded pipe connections.” No publicado, 2007.
dc.relation.referencesF. Cui, W. Li, G. Wang, Z. Gu, and Z. Wang, “Design and study of gas-tight premium threads for tubing and casing,” Journal of Petroleum Science and Engineering, vol. 133, pp. 208–217, 2015.
dc.relation.referencesR. R. Porcaro, L. C. Cˆandido, V. B. Trindade, G. L. d. Faria, and L. B. Godefroid, “Eva- luation of Standard API Casing Connections and Parametric API Buttress Improvement by Finite Element Analysis,” Materials Research, vol. 20, pp. 130–137, 2017.
dc.relation.referencesN. Ahsan, OCTG Premium Threaded Connection 3D Parametric Finite Element Model. Ms thesis, Virginia Tech, Blacksburg, Estados Unidos, 2016.
dc.relation.referencesK. Yan, The Abaqus/CAE Plug-in for Premium Threaded connection 3D parameter Finite Element Model. Ms thesis, Virginia Tech, Blacksburg, Estados Unidos, 2017.
dc.relation.referencesJ. C. M. Uribe, R. Carrazedo, and A. T. Beck, “Leakage resistance envelopes of API 8 round casing connections using fe analysis,” Latin American Journal of Solids and Structures, vol. 16, 2019.
dc.relation.referencesM. Abdel-Basset, L. Abdel-Fatah, and A. K. Sangaiah, “Chapter 10 - metaheuristic algo- rithms: A comprehensive review,” in Computational Intelligence for Multimedia Big Data on the Cloud with Engineering Applications (A. K. Sangaiah, M. Sheng, and Z. Zhang, eds.), Intelligent Data-Centric Systems, pp. 185–231, Academic Press, 2018.
dc.relation.referencesK. Deb, Multi-objective optimization using evolutionary algorithms, vol. 16. John Wiley & Sons, 2001.
dc.relation.referencesK. Deb, A. Pratap, S. Agarwal, and T. Meyarivan, “A fast and elitist multiobjective genetic algorithm: NSGA-II,” IEEE Transactions on Evolutionary Computation, vol. 6, no. 2, pp. 182–197, 2002.
dc.relation.referencesE. Zitzler, M. Laumanns, and L. Thiele, “Spea2: Improving the strength pareto evolu- tionary algorithm,” TIK-report, vol. 103, 2001.
dc.relation.referencesK. Deb, “An efficient constraint handling method for genetic algorithms,” Computer Methods in Applied Mechanics and Engineering, vol. 186, no. 2, pp. 311–338, 2000.
dc.relation.referencesK. Deb and R. B. Agrawal, “Simulated binary crossover for continuous search space,” Complex systems, vol. 9, no. 2, pp. 115–148, 1995.
dc.relation.referencesK. Kostas, A. Ginnis, C. Politis, and P. Kaklis, “Shape-optimization of 2D hydrofoils using an isogeometric BEM solver,” Computer-Aided Design, vol. 82, pp. 79–87, 2017. Isogeometric Design and Analysis.
dc.relation.referencesA. Gauch´ıa, B. Boada, M. Boada, and V. D´ıaz, “Integration of MATLAB and ANSYS for advanced analysis of vehicle structures,” in MATLAB (K. Bennett, ed.), ch. 7, Inte- chOpen, 2014.
dc.relation.referencesAmerican Petroleum Institute, API Specification 5B, Threading, Gauging and Thread Inspection of Casing, Tubing, and Line Pipe Threads, 16 ed., 2017.
dc.relation.referencesAmerican Petroleum Institute, API Specification 5CT, Specification for Casing and Tu- bing, 8 ed., 2005.
dc.relation.referencesM. K. Thompson and J. M. Thompson, ANSYS mechanical APDL for finite element analysis. Butterworth-Heinemann, 2017.
dc.relation.referencesW. Ramberg and W. R. Osgood, “Description of stress-strain curves by three parame- ters,” Tech. Rep. 902, National Advisory Committee for aeronautics, 1943.
dc.relation.referencesAmerican Petroleum Institute, API TR 5C3, Calculating Performance Properties of Pipe Used as Casing or Tubing, 7 ed., 2018.
dc.relation.referencesInternational Organization for Standardization, ISO 13679, Petroleum and natural gas industries — Procedures for testing casing and tubing connections, 2 ed., 2019.
dc.rights.accessrightsinfo:eu-repo/semantics/openAccess
dc.subject.proposalPremium thread
dc.subject.proposalRosca Premium
dc.subject.proposalGenetic Algorithms
dc.subject.proposalAlgoritmos genéticos
dc.subject.proposalElementos finitos
dc.subject.proposalFinite element analysis
dc.type.coarhttp://purl.org/coar/resource_type/c_1843
dc.type.coarversionhttp://purl.org/coar/version/c_ab4af688f83e57aa
dc.type.contentText
oaire.accessrightshttp://purl.org/coar/access_right/c_abf2


Archivos en el documento

Thumbnail
Nombre:
1072661876.2020.pdf
Tamaño:
2.782Mb
Formato:
PDF
Descargar
Thumbnail
Nombre:
license_rdf
Tamaño:
701bytes
Formato:
application/rdf+xml
Descargar

Este documento aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del documento

Atribución-NoComercial 4.0 InternacionalEsta obra está bajo licencia internacional Creative Commons Reconocimiento-NoComercial 4.0.Este documento ha sido depositado por parte de el(los) autor(es) bajo la siguiente constancia de depósito