Influencia de la dirección de impresión, espesor y tiempo de recocido en las propiedades mecánicas del Nylon 12 usado en manufactura aditiva SLS
Tipo de contenido
Trabajo de grado - Doctorado
Idioma del documento
EspañolFecha de publicación
2024Resumen
La manufactura aditiva es uno de los campos de investigación que actualmente llaman el interés de la industria y de la comunidad científica. Existen diferentes tecnologías, sin embargo, una de las de mayor interés es la tecnología de Sinterizado Laser Selectivo (SLS), ya que esta permite construir piezas no paramétricas, en tiempos relativamente cortos con material reciclado. Actualmente esta tecnología se sigue investigando porque presenta muchas variables de diseño, máquina, postproceso con influencia significativa en las propiedades térmicas, químicas, mecánicas, entre otras. Las investigaciones más recientes se han centrado en parámetros ajenos a los parámetros del láser y máquina, con el fin de brindar herramientas y alimentar las guías de diseño para que los usuarios que deseen mejorar la calidad de sus productos, sin necesidad de invertir en la modificación de parámetros de la máquina. Por esta razón en la presente investigación se estudió la influencia de la dirección de impresión, espesor de pared y tiempo de recocido en las propiedades químicas, térmicas, mecánicas de PA 12 evaluando si los cambios presentados entre variables son estadísticamente significativos. Además, se caracterizó la materia en prima en polvo a una tasa de 70 % polvo reciclado y 30 % polvo virgen para evaluar si existen diferencias notables cuando son sometidos a ciclos de sinterizado. Se identificó que polvo reciclado presentó cambios notables después del primer y segundo ciclo de sinterizado, mostrando un aumento del 30 % en el porcentaje de cristalinidad en comparación con el polvo mezclado. La temperatura de cristalización presentó un aumento a medida que se aumentaban los ciclos de reciclado el polvo, mientras que la temperatura de fusión disminuyó. Sin embargo, no se presentaron cambios significativos en la composición química y las fases presentes en el material asociados al uso del polvo en diferentes ciclos. En cuanto al tamaño de partícula, el diámetro del polvo mezclado es estadísticamente menor a las otras condiciones de sinterizado. Además, se caracterizó la morfología del polvo y se relacionó con la morfología del cristal de partícula, mostrando cambios asociados a la afectación térmica producto de los ciclos de sinterizado. Por otra parte, las variables de espesor de pared, tiempo de recocido y dirección de impresión presentaron cambios significativos en las propiedades térmicas, morfológicas, y mecánicas de los especímenes manufacturados en PA 12. Las condiciones que presentaron mayores diferencias fueron la dirección vertical y el espesor de 2.0 mm, mostrando menores valores de área transversal, resistencia ultima a la tracción (UTS), elongación a la rotura (Eab), dureza y porcentaje dúctil de fractura estadísticamente menores en comparación con las otras direcciones. Se identifico que el porcentaje de cristalinidad es afectada tanto por el espesor y por la dirección de impresión. Este parámetro mostró un aumento considerable en el rango de valores en la condición de 3 horas de estancia de recocido, repercutiendo en un aumento de la resistencia mecánica, una caída en la elongación a la rotura. El módulo de elasticidad solo fue afectado por la dirección de impresión, puesto que en esta dirección se presentaron los valores de defectología de mayor medida. No se identificaron cambios químicos y estructurales en función de las tres variables de entrada. Por último, se contrastaron las diferencias significativas de manera puntual y funcional. En las condiciones químicas se presentaron diferencias significativas en la prueba funcional, posiblemente asociadas a la preparación de la muestra. Por otra parte, la caracterización térmica mostró diferencias en función de la dirección de impresión. Por último, la dirección de impresión y el tratamiento térmico afectaron funcionalmente los valores de esfuerzo, mientras que la elongación a la rotura fue afectada únicamente por la dirección de impresión. (Texto tomado de la fuente).Abstract
Additive manufacturing is one of the research fields currently attracting the interest of the industry and the scientific community. There are different technologies, however, one of the most interesting is the Selective Laser Sintering (SLS) technology, since it allows the construction of non-parametric parts in relatively short times with recycled material. Currently, this technology is still being researched because it presents many design, machine and post-processing variables with significant influence on thermal, chemical and mechanical properties, among others. The most recent research has focused on parameters outside the parameters of the laser and machine, to provide tools and feed the design guides for users who wish to improve the quality of their products, without investing in the modification of machine parameters. For this reason, in the present research the influence of printing direction, wall thickness and annealing time on the chemical, thermal, mechanical properties of PA 12 was studied evaluating if the changes presented between variables are statistically significant. In addition, the raw material was characterized in powder form at a rate of 70% recycled powder and 30% virgin powder to evaluate if there are noticeable differences when subjected to sintering cycles. It was identified that recycled powder presented remarkable changes after the first and second sintering cycle, showing a 30 % increase in the percentage of crystallinity compared to the mixed powder. The crystallization temperature presented an increase as the powder cycles increased. Contrary to this behavior, as the sintering cycles increased, the melting temperature decreased. As for the particle size, the diameter of the mixed powder is statistically smaller than the other sintering conditions. As for the chemical composition and phases present in the material, there were no significant changes associated with the use of the powder in different cycles. In addition, the morphology of the powder was characterized and related to the morphology of the particle crystal, showing changes associated to the thermal affectation product of the sintering cycles. On the other hand, the variables of wall thickness, annealing time and printing direction presented significant changes in the thermal, morphological, and mechanical properties of the specimens manufactured in PA 12. The condition that presented the greatest differences were the vertical direction and the 2.0 mm thickness, showing lower values of cross-sectional area, ultimate tensile strength (UTS), elongation at break (Eab), hardness and ductile fracture percentage statistically lower compared to the other directions. It was identified that the percentage of crystallinity is affected by both the thickness and the printing direction. This parameter showed a considerable increase in the range of values in the condition of 3 hours of annealing stay, resulting in an increase in mechanical strength, a drop in elongation at break. The modulus of elasticity was only affected by the printing direction, since the highest defect values were found in this direction. No chemical and structural changes were identified as a function of the three input variables. Finally, significant differences were contrasted in a pointwise and functional manner. In the chemical conditions, there were significant differences in the functional test, possibly associated with the sample preparation. On the other hand, the thermal characterization showed differences as a function of the printing direction. Finally, the printing direction and heat treatment functionally affected the stress mechanical properties. The printing direction only affected the elongation at break.Palabras clave
Descripción Física/Lógica/Digital
ilustraciones, diagramas
Colecciones
Esta obra está bajo licencia internacional Creative Commons Reconocimiento-NoComercial 4.0.Este documento ha sido depositado por parte de el(los) autor(es) bajo la siguiente constancia de depósito