Mostrar el registro sencillo del documento

Prototipo de una herramienta de software de calificación automática con proceso de realimentación para el apoyo al aprendizaje de lenguajes de descripción de hardware

dc.rights.licenseReconocimiento 4.0 Internacional
dc.contributor.advisorRestrepo Calle, Felipe
dc.contributor.advisorRamírez Echeverry, Jhon Jairo
dc.contributor.authorCorso Pinzón, Andrés Francisco José
dc.date.accessioned2023-05-31T19:08:34Z
dc.date.available2023-05-31T19:08:34Z
dc.date.issued2023
dc.identifier.urihttps://repositorio.unal.edu.co/handle/unal/83931
dc.descriptionilustraciones, gráficas, tablas
dc.description.abstractLos lenguajes de descripción de hardware se han popularizado en el diseño de electrónica digital debido al aumento de la complejidad de los circuitos actuales. Debido a lo anterior, se hace necesario apoyar el proceso de aprendizaje de electrónica digital utilizando estos lenguajes. El objetivo principal de este trabajo es desarrollar un prototipo de una herramienta de software de calificación automática con proceso de realimentación para el apoyo al aprendizaje de Lenguajes de Descripción de Hardware. Para lograrlo, este trabajo presenta la selección de características que debería incluir el prototipo, basado en otras herramientas similares. Posteriormente se realizó el diseño e implementación de un prototipo que fue usado por estudiantes del curso de Electrónica Digital de la Universidad Nacional de Colombia por cinco (5) semanas. Con este estudio se obtuvieron las percepciones de su uso. Los estudiantes encontraron útil para el proceso de aprendizaje tener una herramienta de calificación automática con realimentación, pues al estar disponible en línea da una ventaja al no depender de un profesor o tutor. (Texto tomado de la fuente).
dc.description.abstractHardware description languages have become popular in digital electronics design due to the increasing complexity of today’s circuits. Therefore, it is necessary to support the learning process of digital electronics using these languages. The main objective of this work is to develop a prototype of an automatic assessment software tool with feedback process to support the learning of Hardware Description Languages. To achieve this, this work presents the selection of features that the prototype should include, based on other similar tools. Additionally, a prototype was designed and implemented for use with students of the Digital Electronics course at the National University of Colombia for 5 weeks. With this study, the perceptions of its use were obtained. It was found that students find it useful in the learning process to have an automatic grading tool with feedback, since being available online gives an advantage by not depending on a teacher or tutor.
dc.format.extentxi, 68 páginas
dc.format.mimetypeapplication/pdf
dc.language.isospa
dc.publisherUniversidad Nacional de Colombia
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/
dc.subject.ddc000 - Ciencias de la computación, información y obras generales::004 - Procesamiento de datos Ciencia de los computadores
dc.titlePrototipo de una herramienta de software de calificación automática con proceso de realimentación para el apoyo al aprendizaje de lenguajes de descripción de hardware
dc.typeTrabajo de grado - Maestría
dc.type.driverinfo:eu-repo/semantics/masterThesis
dc.type.versioninfo:eu-repo/semantics/acceptedVersion
dc.publisher.programBogotá - Ingeniería - Maestría en Ingeniería - Ingeniería de Sistemas y Computación
dc.description.notesIncluye anexos
dc.contributor.researchgroupPlas Programming languages And Systems
dc.description.degreelevelMaestría
dc.description.degreenameMagíster en Ingeniería - Ingeniería de Sistemas y Computación
dc.description.researchareaComputación aplicada - Educación en ingeniería
dc.identifier.instnameUniversidad Nacional de Colombia
dc.identifier.reponameRepositorio Institucional Universidad Nacional de Colombia
dc.identifier.repourlhttps://repositorio.unal.edu.co/
dc.publisher.facultyFacultad de Ingeniería
dc.publisher.placeBogotá, Colombia
dc.publisher.branchUniversidad Nacional de Colombia - Sede Bogotá
dc.relation.referencesACM and IEEE-CS (2016). Computer Engineering Curricula 2016. IEEE.
dc.relation.referencesBaneres, D., Clariso, R., Jorba, J., and Serra, M. (2014). Experiences in digital circuit design courses: A self-study platform for learning support. IEEE Transactions on Learning Technologies, 7(4):360–374.
dc.relation.referencesBaneres, D. and Saiz, J. (2016). Intelligent Tutoring System for Learning Digital Systems on MOOC Environments. Proceedings - 2016 10th International Conference on Complex, Intelligent, and Software Intensive Systems, CISIS 2016, pages 95–102.
dc.relation.referencesBryman, A. (2012). Social Research Methods. Oxford University Press, 4th edition edition.
dc.relation.referencesBurch, C. (2011). Logisim.
dc.relation.referencesCarroll, C. R. (2011). Teaching Ground-Floor Digital Circuits to Pre-Engineering Students. ASEE Annual Conference and Exposition, Conference Proceedings.
dc.relation.referencesChapyzhenka, A. and Probell, J. (2016). WaveDrom Rendering Beautiful Waveforms from Plain Text. SNUG 2016, pages 1–42.
dc.relation.referencesCimatti, A., Clarke, E., Giunchiglia, E., Giunchiglia, F., Pistore, M., Roveri, M., Sebastiani, R., and Tacchella, A. (2002). NuSMV 2: An opensource tool for symbolic model checking. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 2404:359–364.
dc.relation.referencesCirka, L. and Kaluz, M. (2017). A web-based tool for design of Simulink models. Proceedings of the 2017 21st International Conference on Process Control, PC 2017, pages 92–97.
dc.relation.referencesCorsini, P. and Rizzo, L. (1991). SSCSSC: A tool for the Teaching of Digital Circuits. IEEE Transactions on Education.
dc.relation.referencesFujita, M., Ghosh, I., and Prasad, M. (2008). VERIFICATION TECHNIQUES FOR SYSTEM-LEVEL DESIGN. Elsevier.
dc.relation.referencesGeorgakopoulos, D. and Jayaraman, P. P. (2016). Internet of things: from internet scale sensing to smart services. Computing, 98(10):1041–1058.
dc.relation.referencesGreenwood, G. W. (2013). Teaching Hardware Description Languages to Satisfy Industry Expectations. International Journal of Electrical Engineering & Education, 46(3):239–247.
dc.relation.referencesJansen, D. and Dusch, B. (2014). Every student makes his own microprocessor. 10th European Workshop on Microelectronics Education, EWME 2014, pages 97–101.
dc.relation.referencesJutman, A., Ubar, R., Hahanov, V., and Skvortsova, O. (2002). Practical works for on-line teaching design and test of digital circuits. Proceedings of the IEEE International Conference on Electronics, Circuits, and Systems, 3:1223–1226.
dc.relation.referencesKusairi, S. (2019). A web-based formative feedback system development by utilizing isomorphic multiple choice items to support physics teaching and learning. Journal of Technology and Science Education, 10:117–126.
dc.relation.referencesLa Meres, B. J. (2019). Introduction to logic circuits & logic design with VHDL. Springer Nature Switzerland, 2nd edition edition.
dc.relation.referencesMadanayake, A., Wijenayake, C., Joshi, R. M., Grover, J., Carletta, J., Adams, J., Hartley, T., and Ogunfunmi, T. (2012). Teaching freshmen VHDL-based digital design. ISCAS 2012 - 2012 IEEE International Symposium on Circuits and Systems, pages 2701–2704.
dc.relation.referencesMateev, V., Manoilov, P., and Iliev, M. (2004). Tutoring tool for logical schemes design. Proc. International Conference on Computer Systems and Technologies, page 1.
dc.relation.referencesMepits (2014). Hardware description language. https://www.mepits.com/tutorial/143/vlsi/hardwaredescription-language. [Online; accessed 30-June-2019].
dc.relation.referencesMuchlas and Novianta, M. A. (2016). An online lab for digital electronics course using information technology supports. Proceedings - 2015 International Conference on Science in Information Technology: Big Data Spectrum for Future Information Economy, ICSITech 2015, pages 299–302.
dc.relation.referencesNutter, P. W., Pavlidis, V. F., and Pepper, J. (2014). Efficient teaching of digital design with automated assessment and feedback. 10th European Workshop on Microelectronics Education, EWME 2014, pages 203–207.
dc.relation.referencesPereira, M. C., Viera, P. V., Raabe, A. L. A., and Zeferino, C. A. (2012). A basic processor for teaching digital circuits and systems design with FPGA. SPL 2012 - 8th Southern Programmable Logic Conference.
dc.relation.referencesPetit, J., Roura, S., Carmona, J., Cortadella, J., Duch, J., Giménez, O., Mani, A., Mas, J., RodríguezCarbonell, E., Rubio, E., De San Pedro, E., and Venkataramani, D. (2018). Jutge.org: Characteristics and Experiences. IEEE Transactions on Learning Technologies, 11(3):321–333.
dc.relation.referencesPomberger, G. and Bischofberger, W. (1992). Prototyping-Oriented Software Development. SpringerVerlag.
dc.relation.referencesPomberger, G., Bischofberger, W., Kolb, D., Pree, W., and Schlemm, H. (1998). Prototyping-oriented software development - concepts and tools. Structured Programming, 12.
dc.relation.referencesRestrepo-Calle, F., Ramírez-Echeverry, J. J., and Gonzalez, F. A. (2018). Uncode: Interactive System for Learning and Automatic Evaluation of Computer Programming Skills. EDULEARN18 Proceedings, 1(July):6888–6898.
dc.relation.referencesRobal, T. and Kalja, A. (2007). Applying e-environments in teaching the basics of digital logic. Proceedings - MSE 2007: 2007 IEEE International Conference on Microelectronic Systems Education: Educating Systems Designers for the Global Economy and a Secure World, pages 41–42.
dc.relation.referencesRoy, G., Ghosh, D., Mandal, C., and Mitra, I. (2016). Aiding Teaching of Logic Design and Computer Organization through Dynamic Problem Generation and Automatic Checker Using COLDVL Tool. Proceedings - IEEE 7th International Conference on Technology for Education, T4E 2015, pages 15–22.
dc.relation.referencesStanisavljevic, Z., Pavlovic, V., Nikolic, B., and Djordjevic, J. (2013). SDLDS-system for digital logic design and simulation. IEEE Transactions on Education, 56(2):235–245.
dc.relation.referencesTeepe, G. (2014). The growing importance of microelectronics from a foundry perspective. 2014 Design, Automation & Test in Europe Conference & Exhibition (DATE), pages 1–1.
dc.relation.referencesUNAL (2019). Ingeniería electrónica. https://ingenieria.bogota.unal.edu.co/es/formacion/pregrado/ingenieriaelectronica.html. [Online; accessed 10-Dec-2019].
dc.relation.referencesUniversité Catholique de Louvain (2014). Inginious. https://inginious.org/. [Online; accessed 16-June-2020].
dc.rights.accessrightsinfo:eu-repo/semantics/openAccess
dc.subject.proposalHDL
dc.subject.proposalHDL
dc.subject.proposalCalificación automática
dc.subject.proposalRealimentación
dc.subject.proposalAprendizaje
dc.subject.proposalPercepciones
dc.subject.proposalDiseño digital
dc.subject.proposalLenguajes de descripción de hardware
dc.subject.proposalElectrónica digital
dc.subject.proposalAutomatic grading
dc.subject.proposalFeedback
dc.subject.proposalLearning
dc.subject.proposalPerceptions
dc.subject.proposalDigital design
dc.subject.proposalHardware description languages
dc.subject.proposalDigital electronics
dc.subject.unescoEnseñanza asistida por ordenador
dc.subject.unescoComputer assisted instruction
dc.subject.unescoLenguaje de programación
dc.subject.unescoComputer languages
dc.subject.unescoEvaluación del estudiante
dc.subject.unescoStudent evaluation
dc.title.translatedPrototype of an automatic qualification software tool with feedback process for hardware description language learning support
dc.type.coarhttp://purl.org/coar/resource_type/c_bdcc
dc.type.coarversionhttp://purl.org/coar/version/c_ab4af688f83e57aa
dc.type.contentText
dc.type.redcolhttp://purl.org/redcol/resource_type/TM
oaire.accessrightshttp://purl.org/coar/access_right/c_abf2
dcterms.audience.professionaldevelopmentEstudiantes
dcterms.audience.professionaldevelopmentMaestros
dcterms.audience.professionaldevelopmentPersonal de apoyo escolar


Archivos en el documento

Thumbnail
Nombre:
1019036390.2023.pdf
Tamaño:
1.013Mb
Formato:
PDF
Descripción:
Tesis de Maestría en Ingeniería ...
Descargar

Este documento aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del documento

Reconocimiento 4.0 InternacionalEsta obra está bajo licencia internacional Creative Commons Reconocimiento-NoComercial 4.0.Este documento ha sido depositado por parte de el(los) autor(es) bajo la siguiente constancia de depósito