Metodología para caracterización de la rugosidad superficial 3D en la superficie de implantes de titanio y su relación con la función de oseointegración

dc.contributor.advisorCortés Rodriguez, Carlos Julio
dc.contributor.authorLagos Tovar, Cristian Romario
dc.contributor.researchgroupGrupo de Investigación en Biomecánica / Universidad Nacional de Colombia Gibm-Uncbspa
dc.date.accessioned2023-11-30T19:01:38Z
dc.date.available2023-11-30T19:01:38Z
dc.date.issued2023
dc.descriptionilustraciones, diagramas, fotografíasspa
dc.description.abstractMetodología para caracterización de la rugosidad superficial 3D en la superficie de implantes de titanio y su relación con la función de oseointegración Actualmente existe un gran grupo de parámetros de superficie en 2D y 3D para caracterizar superficies rugosas por métodos ópticos. Los parámetros empleados para la caracterización de la rugosidad de la superficie de implantes de titanio no permiten hacer una diferenciación adecuada para investigaciones de superficies oseointegrables. En la literatura se describen más de 40 parámetros de análisis topográfico que fueron objeto de estudio. De acuerdo con las propiedades como rugosidad, humectabilidad y anisotropía se plantearon diferentes objetivos para lograr caracterizar superficies oseintegrables y asociarlas con las etapas de la oseointegración. Las superficies podrían considerarse oseointegrables cuando su valor de rugosidad media, $ Sa \leq 2{\mu}m$. Como metodología se realizó una caracterización superficial de siete implantes de titanio con diferentes modificaciones superficiales (microarenado, microtexturizado y ataque con ácido) basados en la $ISO$ 25178 con un microscopio de variación focal marca Alicona Infinite Focus\texttrademark, teniendo en cuenta configuraciones de filtrado como forma, ondulación y rugosidad. Siguiendo los lineamientos de la norma ISO 25178-2 y la ISO 4287/88 se realizaron caracterizaciones superficiales con parámetros de rugosidad clasificados en 4 grupos altura, híbridos, funcionales y espaciales. Las mediciones fueron hechas en la cara lateral de la rosca del implante. Como el valor de rugosidad media $Sa$ no es suficiente para describir una superficie oseointegrable, utilizando métodos estadísticos y conceptos biológicos, se encontraron 8 parámetros de rugosidad significativos $S_z$, $S_d_r$, $S_d_q$, $S_p$ $S_t_r$ , $S_t_d$, $V_v_c$ y $V_v_v$ que lograron diferenciar las superficies analizadas. En esta investigación se planteó un paquete de parámetros de rugosidad 3D para caracterizar superficies oseointegrables. (Texto tomado de la fuente)spa
dc.description.abstractMethodology for characterization of 3D surface roughness on the surface of titanium implants and its relationship to osseointegration function A large set of 2D and 3D surface parameters is currently available to characterize rough surfaces by optical methods. The parameters used for the characterization of the surface roughness of titanium implants do not provide a suitable differentiation for investigations of osseointegrable surfaces. More than 40 parameters of topographic analysis are described in the literature and have been studied. According to the properties such as roughness, wettability and anisotropy, different objectives were proposed to characterize osseointegrable surfaces and associate them with the stages of osseointegration. Surfaces could be considered osseointegrable when their average roughness value, $ Sa \leq 2{\mu}m$. As a methodology, a surface characterization of seven titanium implants with different surface modifications (micro-sandblasting and acid etching and microtexturing) based on ISO 25178 was performed with an Alicona Infinite Focus\texttrademark, focus variation microscope, taking into account filtering configurations such as shape, waviness and roughness. In accordance with the guidelines of ISO 25178-2 and ISO 4287/88, surface characterizations were carried out with roughness parameters classified into 4 groups: height, hybrid, functional and spatial. The measurements were made on the lateral face of the implant thread. As the average roughness value $S_a$ is not sufficient to describe an osseointegrable surface, using statistical methods and biological concepts, 8 significant roughness parameters $S_z$, $S_d_r$, $S_d_q$, $S_p$ $S_t_r$ , $S_t_d$, $V_v_c$ and $V_v_v$ were found that managed to differentiate the analyzed surfaces. In this study, a 3D roughness parameter package was proposed to characterize osseointegrable surfaces.eng
dc.description.degreelevelMaestríaspa
dc.description.degreenameMagíster en Ingeniería - Materiales y Procesosspa
dc.description.researchareaBiomaterialesspa
dc.format.extentxvi, 62 páginasspa
dc.format.mimetypeapplication/pdfspa
dc.identifier.instnameUniversidad Nacional de Colombiaspa
dc.identifier.reponameRepositorio Institucional Universidad Nacional de Colombiaspa
dc.identifier.repourlhttps://repositorio.unal.edu.co/spa
dc.identifier.urihttps://repositorio.unal.edu.co/handle/unal/85029
dc.language.isospaspa
dc.publisherUniversidad Nacional de Colombiaspa
dc.publisher.branchUniversidad Nacional de Colombia - Sede Bogotáspa
dc.publisher.facultyFacultad de Ingenieríaspa
dc.publisher.placeBogotá, Colombiaspa
dc.publisher.programBogotá - Ingeniería - Maestría en Ingeniería - Ingeniería Mecánicaspa
dc.relation.references[Acosta et al., 2010] Acosta, J., Landinez, N., and Garzón-Alvarado, D. (2010). Mecanobio- logía de la interfase hueso-implante dental. Revista Cubana de Estomatología, 47:14–36.spa
dc.relation.references[Al2O et al., ] Al2O, A., Vidrio, V., Vidrio, V., Vidrio, V., and Vidrio, V. Tratamientos de superficie en biomateriales: efectos del blasting sobre implantes dentales de titanio.spa
dc.relation.references[Albrektsson et al., 1981] Albrektsson, T., Branemark, P., Hansson, H.-A., and JJ, L. (1981). Osseointegrated titanium implants: Requirements for ensuring a long-lasting, direct bone- to-implant anchorage in man. Acta orthopaedica Scandinavica, 52:155–70.spa
dc.relation.references[Albrektsson and Wennerberg, 2004] Albrektsson, T. and Wennerberg, A. (2004). Oral im- plant surfaces: Part 1–review focusing on topographic and chemical properties of different surfaces and in vivo responses to them. International Journal of Prosthodontics, 17(5).spa
dc.relation.references[Annunziata and Guida, 2015] Annunziata, M. and Guida, L. (2015). The effect of tita- nium surface modifications on dental implant osseointegration. Biomaterials for Oral and Craniomaxillofacial Applications, 17:62–77.spa
dc.relation.references[Barfeie et al., 2015] Barfeie, A., Wilson, J., and Rees, J. (2015). Implant surface characte- ristics and their effect on osseointegration. British dental journal, 218(5):E9–E9.spa
dc.relation.references[Blanco López et al., 2018] Blanco López, P., Monsalve Guil, L., Matos Garrido, N., Mo- reno Mun˜oz, J., Nun˜ez M´arquez, E., and Velasco Ortega, E. (2018). La oseointegración de implantes de titanio con diferentes superficies rugosas. Avances en odontoestomatología, 34(3):141–149.spa
dc.relation.references[Bohm, 1992] Bôhm, H.-J. (1992). Parameters for evaluating the wearing behaviour of sur- faces. International Journal of Machine Tools and Manufacture, 32(1-2):109–113.spa
dc.relation.references[Browne and Gregson, 2000] Browne, M. and Gregson, P. (2000). Effect of mechanical sur- face pretreatment on metal ion release. Biomaterials, 21(4):385–392.spa
dc.relation.references[Buser et al., 1991] Buser, D., Schenk, R., Steinemann, S., Fiorellini, J., Fox, C., and Stich,spa
dc.relation.referencesH. (1991). Influence of surface characteristics on bone integration of titanium implants. a histomorphometric study in miniature pigs. Journal of biomedical materials research, 25(7):889–902.spa
dc.relation.references[Damiati et al., 2018] Damiati, L., Eales, M. G., Nobbs, A. H., Su, B., Tsimbouri, P. M., Salmeron-Sanchez, M., and Dalby, M. J. (2018). Impact of surface topography and coating on osteogenesis and bacterial attachment on titanium implants. Journal of Tissue Engi- neering, 9:2041731418790694spa
dc.relation.references[Helmli, 2011] Helmli, F. (2011). Focus variation instruments. In Optical Measurement of Surface Topography, pages 131–166. Springer.spa
dc.relation.references[Hench, 1999] Hench, L. L. (1999). Bioactive glasses and glass-ceramics. In Materials science forum, volume 293, pages 37–64. Trans Tech Publ.spa
dc.relation.references[Hitchcock et al., 1981] Hitchcock, S., Carroll, N., and Nicholas, M. (1981). Some effects of substrate roughness on wettability. Journal of Materials Science, 16(3):714–732.spa
dc.relation.references[Hocken et al., 2005] Hocken, R., Chakraborty, N., and Brown, C. (2005). Optical metrology of surfaces. CIRP Annals, 54(2):169–183.spa
dc.relation.references[Indy, 2018] Indy, A. (2018). Metodología de micro medición de superficies: forma y rugosidad 3d con m´etodo o´ptico de variaci´on focal. Universidad Nacional de Colombia.spa
dc.relation.references[Kumar, 2012] Kumar, J. (2012). Surface coating of implants-a review. 4:32–35.spa
dc.relation.references[Kumar et al., 2019] Kumar, P. S., KS, S. K., Grandhi, V. V., and Gupta, V. (2019). The ef- fects of titanium implant surface topography on osseointegration: literature review. JMIR Biomedical Engineering, 4(1):e13237.spa
dc.relation.references[Le Gu´ehennec et al., 2007] Le Gu´ehennec, L., Soueidan, A., Layrolle, P., and Amouriq, Y. (2007). Surface treatments of titanium dental implants for rapid osseointegration. Dental materials, 23(7):844–854.spa
dc.relation.references[Leach, R. (Ed.). (2011).] Optical measurement of surface topography (Vol. 8). Berlin, Heidelberg: Springer Berlin Heidelberg.spa
dc.relation.references[Leach, 2013] Leach, R. (2013). Characterisation of Areal Surface Texture.spa
dc.relation.references[Naves et al., 2015] Naves, M. M., Menezes, H. H. M., Magalhaes, D., Ferreira, J. A., Ribeiro, S. F., Biasoli de Mello, J. D., and Costa, F. L. (2015). Effect of macrogeometry on the surface topography of dental implants. International Journal of Oral & Maxillofacial Implants, 30(4).spa
dc.relation.references[PACKHAM, 2002] PACKHAM, D. E. (2002). Surface roughness and adhesion. In Adhesion Science and Engineering, pages 317–349. Elsevier.spa
dc.relation.references[Rosa et al., 2013] Rosa, M. B., Albrektsson, T., Francischone, C. E., Wennerberg, A., et al. (2013). Micrometric characterization of the implant surfaces from the five largest compa- nies in brazil, the second largest worldwide implant market. International Journal of Oral & Maxillofacial Implants, 28(2).spa
dc.relation.references[Sasaki et al., ] Sasaki, K., Suzuki, O., and Takahashi, N. Interface Oral Health Science 2016.spa
dc.relation.references[Sul et al., 2005] Sul, Y.-T., Johansson, C., Wennerberg, A., Cho, L.-R., Chang, B.-S., and Albrektsson, T. (2005). Optimum surface properties of oxidized implants for reinforcement of osseointeg ration: Surface chemistry, oxide thickness, porosity, roughness, and crystal structure. International Journal of Oral & Maxillofacial Implants, 20(3).spa
dc.relation.references[Sul et al., 2002a] Sul, Y.-T., Johansson, C. B., and Albrektsson, T. (2002a). Oxidized tita- nium screws coated with calcium ions and their performance in rabbit bone. International Journal of Oral & Maxillofacial Implants, 17(5).spa
dc.relation.references[Sul et al., 2002b] Sul, Y.-T., Johansson, C. B., R¨oser, K., and Albrektsson, T. (2002b). Qualitative and quantitative observations of bone tissue reactions to anodised implants. Biomaterials, 23(8):1809–1817.spa
dc.relation.references[Velasco-Ortega et al., 2016] Velasco-Ortega, E., Alfonso-Rodr´ıguez, C., Monsalve-Guil, L., Espan˜a-L´opez, A., Jim´enez-Guerra, A., Garz´on, I., Alaminos, M., and Gil, F. (2016). Relevant aspects in the surface properties in titanium dental implants for the cellular viability. Materials Science and Engineering: C, 64:1–10.spa
dc.relation.references[Wennerberg and Albrektsson, 2000a] Wennerberg, A. and Albrektsson, T. (2000a). Sug- gested guidelines for the topographic evaluation of implant surfaces. The International journal of oral maxillofacial implants, 15 3:331–44.spa
dc.relation.references[Wennerberg and Albrektsson, 2000b] Wennerberg, A. and Albrektsson, T. (2000b). Sugges- ted guidelines for the topographic evaluation of implant surfaces. International Journal of Oral & Maxillofacial Implants, 15(3).spa
dc.relation.references[Yuan et al., 2019] Yuan, L., Guo, T., Qiu, Z., Fu, X., and Hu, X. (2019). Measurement of geometrical parameters of cutting tool based on focus variation technology. The Interna- tional Journal of Advanced Manufacturing Technology, 105(5):2383–2391.spa
dc.relation.references[ISO 25178-2:2012] Geometrical product specifications (GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture parametersspa
dc.relation.references[ISO 4288:1996(en)] Geometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and procedures for the assessment of surface texturespa
dc.relation.references[ISO 4287:1997] Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parametersspa
dc.relation.references[ISO 11562:1996] Geometrical product specifications (GPS) - Surface texture: Profile method - Metrological characteristics of phase correct filters.spa
dc.relation.referencesCortés Rodríguez, C. J., Herreño Cuestas, F. A., & Araque-Salazar, I. Z. (2020). Medición de rugosidad superficial 3D. kassel university press GmbH.spa
dc.relation.referencesLu, A., Gao, Y., Jin, T., Luo, X., Zeng, Q., & Shang, Z. (2020). Effects of surface roughness and texture on the bacterial adhesion on the bearing surface of bio-ceramic joint implants: An in vitro study. Ceramics International, 46(5), 6550-6559.spa
dc.relation.referencesZhang, Y. (2007). The effect of surface roughness parameters on contact and wettability of solid surfaces. Iowa State University.spa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.rights.licenseReconocimiento 4.0 Internacionalspa
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/spa
dc.subject.ddc660 - Ingeniería química::666 - Cerámica y tecnologías afinesspa
dc.subject.ddc010 - Bibliografía::011 - Bibliografías y catálogosspa
dc.subject.ddc510 - Matemáticas::519 - Probabilidades y matemáticas aplicadasspa
dc.subject.ddc530 - Física::532 - Mecánica de fluidosspa
dc.subject.ddc670 - Manufactura::673 - Metales no ferrososspa
dc.subject.ddc540 - Química y ciencias afines::548 - Cristalografíaspa
dc.subject.lembImagen tridimensional en diseñospa
dc.subject.lembDesign imagingeng
dc.subject.lembImplantes ortopédicosspa
dc.subject.lembOrthopedic implantseng
dc.subject.lembJoint prothesiseng
dc.subject.proposalRugosidad 3Dspa
dc.subject.proposalRoughness 3Deng
dc.subject.proposalOseointegraciónspa
dc.subject.proposalOsseointegrationeng
dc.subject.proposalWettabilityeng
dc.subject.proposalHumectabilidadspa
dc.titleMetodología para caracterización de la rugosidad superficial 3D en la superficie de implantes de titanio y su relación con la función de oseointegraciónspa
dc.title.translatedMethodology for characterization of superficial 3D surface roughness of titanium implants surface and its relationship with osseointegration functioneng
dc.typeTrabajo de grado - Maestríaspa
dc.type.coarhttp://purl.org/coar/resource_type/c_bdccspa
dc.type.coarversionhttp://purl.org/coar/version/c_ab4af688f83e57aaspa
dc.type.contentTextspa
dc.type.driverinfo:eu-repo/semantics/masterThesisspa
dc.type.redcolhttp://purl.org/redcol/resource_type/TMspa
dc.type.versioninfo:eu-repo/semantics/acceptedVersionspa
dcterms.audience.professionaldevelopmentAdministradoresspa
dcterms.audience.professionaldevelopmentEstudiantesspa
dcterms.audience.professionaldevelopmentInvestigadoresspa
dcterms.audience.professionaldevelopmentMaestrosspa
dcterms.audience.professionaldevelopmentPúblico generalspa
oaire.accessrightshttp://purl.org/coar/access_right/c_abf2spa
oaire.fundernameUniversidad Nacional de Colombiaspa

Archivos

Bloque original

Mostrando 1 - 1 de 1
Cargando...
Miniatura
Nombre:
1019099166.2023.pdf
Tamaño:
4.87 MB
Formato:
Adobe Portable Document Format
Descripción:
Tesis de Maestría en Ingeniería - Materiales y Procesos

Bloque de licencias

Mostrando 1 - 1 de 1
Cargando...
Miniatura
Nombre:
license.txt
Tamaño:
5.74 KB
Formato:
Item-specific license agreed upon to submission
Descripción: