Adsorción de cromo hexavalente en solución acuosa empleando un compósito organoarcilla-alginato y su potencial aplicación en un efluente de curtiembre: caso de estudio municipio de Belén-Nariño

dc.contributor.advisorSanabria González, Nancy Rocío
dc.contributor.advisorGiraldo Gómez, Gloria Inés
dc.contributor.authorMuñoz Martinez, Mayra Ximena
dc.coverage.regionBelén, Nariño, Colombia
dc.date.accessioned2022-02-09T15:57:26Z
dc.date.available2022-02-09T15:57:26Z
dc.date.issued2021-09
dc.descriptiongráficos, tablasspa
dc.description.abstractLos vertimientos de cromo hexavalente a las fuentes de agua generan problemas de contaminación en los ecosistemas acuáticos, debido a que esta especie se ha catalogado como mutagénica y carcinógena, es persistente en el medio y puede bioacumularse en los organismos vivos. Se han desarrollado diferentes tecnologías de tratamiento para la remoción de este metal pesado en el agua, cada una de ellas con ventajas y desventajas, y solo el análisis de las características químicas del metal, la carga en los vertimientos, las regulaciones ambientales y los costos de implementación de los procesos pueden determinar su aplicabilidad. La adsorción ha sido reconocida como un tratamiento adecuado para la remoción de metales en soluciones acuosas, debido a su alta eficiencia, simplicidad en las condiciones de operación y bajo costo. En los últimos años se ha incrementado el interés por adsorbentes naturales, con alta capacidad de adsorción, como los minerales arcillosos y sus derivados, los cuales son abundantes en la naturaleza, fácilmente modificables, biocompatibles con otros materiales como el alginato y altamente eficientes para la remoción de diversos compuestos orgánicos. En el presente trabajo final se evaluó el efecto de las variables que intervienen en el proceso de adsorción de cromo hexavalente en una columna de lecho empacado sobre compósitos de organoarcilla-alginato: concentración de fase activa en el adsorbente, pH, caudal de entrada, altura del lecho y concentración inicial de Cr (VI). La organoarcilla se sintetizó a partir de una arcilla tipo bentonita que se modificó con bromuro de hexadeciltrimetilamonio (HDTMA-Br) y se encapsuló en una matriz de alginato. Los resultados indican que la eliminación de Cr(VI) dependen del pH, la cantidad de adsorbente en el lecho, la concentración inicial de Cr (VI) y el caudal. Los datos experimentales de las curvas de avance se ajustaron a los modelos de Log Thomas, Yan, dosis-respuesta modificado y Log Bohart-Adams, y se calcularon los parámetros característicos de cada modelo. Se encontró que los datos experimentales de las curvas de ruptura tienen una tendencia asimétrica y que los modelos que mejor describen su comportamiento son Log Thomas y Yan. A partir del ensayo de adsorción en una muestra de agua residual proveniente de una industria de curtiembres del municipio de Belén-Nariño, se evaluó la potencialidad de los compósitos para la remoción de cromo, obteniéndose remociones de Cr(III) y Cr(VI) superiores del 93.5 y 99.2%, respectivamente (Texto tomado de la fuente)spa
dc.description.abstractDischarges of hexavalent chromium to water sources cause pollution problems in aquatic ecosystems because this form of chromium has been classified as mutagenic and carcinogenic, it is persistent in the environment and it can bioaccumulate in living organisms. Different treatment techniques for the removal of this heavy metal from water have been developed, each with advantages and disadvantages; however, only the analysis of the chemical characteristics of this metal, the pollutant load of wastewater, environmental regulations and process implementation costs can determine their applicability. Due to its high efficiency, simplicity in operating conditions and low cost, adsorption has been recognized as the appropriate treatment for metal removal in aqueous solutions. Recently, interest in natural adsorbents with high adsorption capacity, such as clay minerals and their derivatives, has increased. These adsorbents are abundant in nature, easily modifiable, biocompatible with other materials such as alginate and highly efficient for the removal of various organic compounds. In this paper, the effect of the variables involved in the process of hexavalent chromium adsorption on a bed column packed on organoclay-alginate composites was evaluated: active phase concentration in the adsorbent, pH, input flow rate, bed height, and initial Cr (VI) concentration. From a bentonite-type clay, modified with hexadecyltrimethylammonium bromide (HDTMABr), organoclay was synthesized, and then, it was encapsulated in an alginate matrix. The results show that the removal of Cr (VI) depends on the pH, the amount of adsorbent in the bed, the initial Cr (VI) concentration, and the flow rate. Experimental data for progress curve were adjusted to the Log Thomas, Yan, modified dose-response and Log Bohart-Adams models, and the characteristic parameters of each model were calculated. It was found that breakthrough curves experimental data show an asymmetric tendency, and that Log Thomas and Yan are the models that best describe their behavior. The potentiality of the composites for the removal of chromium was evaluated from the adsorption test in a sample of wastewater from a tannery industry in the municipality of Belén-Nariño, getting removals of Cr (III) and Cr (VI) higher than 93.5% and 99.2%, respectively.eng
dc.description.curricularareaDepartamento de Ingeniería Químicaspa
dc.description.degreelevelMaestríaspa
dc.description.degreenameMagíster en Ingeniería - Ingeniería Ambientalspa
dc.format.extentxv, 87 páginasspa
dc.format.mimetypeapplication/pdfspa
dc.identifier.instnameUniversidad Nacional de Colombiaspa
dc.identifier.reponameRepositorio Institucional Universidad Nacional de Colombiaspa
dc.identifier.repourlhttps://repositorio.unal.edu.co/spa
dc.identifier.urihttps://repositorio.unal.edu.co/handle/unal/80919
dc.language.isospaspa
dc.publisherUniversidad Nacional de Colombiaspa
dc.publisher.branchUniversidad Nacional de Colombia - Sede Manizalesspa
dc.publisher.departmentDepartamento de Ingeniería Químicaspa
dc.publisher.facultyFacultad de Ingeniería y Arquitecturaspa
dc.publisher.placeManizales, Colombiaspa
dc.publisher.programManizales - Ingeniería y Arquitectura - Maestría en Ingeniería - Ingeniería Ambientalspa
dc.relation.referencesMINSALUD - Ministerio de Salud y Protección Social. (2016). Informe nacional de la calidad del agua para consumo humano INCA Bogotá D.C. p. 56.spa
dc.relation.referencesGobernación de Nariño. (2013). Informe de vigilancia de la calidad de agua. San Juan de Pasto. p. 123.spa
dc.relation.referencesGobernación de Nariño. (2019). Plan Departamental de extensión agropecuaria del Departamento de Nariño. San Juan de Pasto. p. 222.spa
dc.relation.referencesCORPONARIÑO - Corporación Autónoma Regional de Nariño. (2011). Plan de ordenamiento quebrada Mocondino Molinos. San Juan de Pasto. p. 20.spa
dc.relation.referencesAgrawal, P.; Bajpai, A. K. (2011). Biosorption of chromium(VI) ions from aqueous solutions by iron oxide-impregnated alginate nanocomposites: batch and column studies. Toxicological & Environmental Chemistry, 93(7): p. 1277-1297.eng
dc.relation.referencesTéllez, J.; Carvajal, M.; Gaitán, A. M. (2004). Aspectos toxicológicos relacionados con la utilización del cromo en el proceso productivo de curtiembres. Facultad de Medicina, 52(1): p. 50-60.spa
dc.relation.referencesCORPONARIÑO - Corporación Autónoma Regional de Nariño. (2008). Diagnóstico biofísico y socioeconómico del municipio de Belén. Belén - Nariño. p. 88.spa
dc.relation.referencesAli, I.; Asim, M.; Khan, T. A. (2012). Low cost adsorbents for the removal of organic pollutants from wastewater. Journal of Environmental Management, 113: p. 170-183.eng
dc.relation.referencesAgarwal, A.; Upadhyay, U.; Sreedhar, I.; Singh, S. A.; Patel, C. M. (2020). A review on valorization of biomass in heavy metal removal from wastewater. Journal of Water Process Engineering, 38: p. 101-602.eng
dc.relation.referencesBelhouchat, N.; Zaghouane-Boudiaf, H.; Viseras, C. (2017). Removal of anionic and cationic dyes from aqueous solution with activated organo-bentonite/sodium alginate encapsulated beads. Applied Clay Science, 135: p. 9-15.eng
dc.relation.referencesCastro-Castro, J. D.; Macías-Quiroga, I. F.; Giraldo-Gómez, G. I.; Sanabria-González, N. R. (2020). Adsorption of Cr(VI) in aqueous solution using a surfactant-modified bentonite. The Scientific World Journal, 2000: p. ID 3628163.eng
dc.relation.referencesTéllez, J.; Carvajal, M.; Gaitán, A. M. (2004). Aspectos toxicológicos relacionados con la utilización del cromo en el proceso productivo de curtiembres. Facultad de Medicina, 52(1): p. 50-60.spa
dc.relation.referencesFrecia,G.D. (2017). Gestión del medio ambiente: El futuro de las curtiembres de la cuenca Matanza Riachuelo, estudio comparado Argentina - Japón. Tesis Doctoral. Universidad de Buenos Aires.spa
dc.relation.referencesNacheva, P. M.; Armenta, S. L.; Camperos, E. R.; Vigueros, L. C. (2003). Tecnología para la remoción y recuperación del cromo trivalente en efluentes de curtido de pieles. Ingeniería Hidráulica en México, 18(1): p. 21-3spa
dc.relation.referencesSecretaría Distrital de Ambiente. (2015). Guía de producción más limpia para sector curtiembres de Bogotá enfoque en vertimientos y residuos. Bogotá D.C. p. 19.spa
dc.relation.referencesVásquez, D. C.; Pérez, L. G.; Preciado, J. C.; Beltrán, J. S., (2017). Efectos en la salud asociados a la exposición ambiental y ocupacional a productos químicos generados en la industria del curtido en la población del barrio San Benito y su área de influencia durante el 2017. Trabajo de investigación en la Línea de Salud Pública. Universidad de Ciencias Aplicadas y Ambientales U.D.C.A.spa
dc.relation.referencesHashem, M. A.; Momen, M. A.; Hasan, M.; Nur-A-Tomal, M. S.; Sheikh, M. H. R. (2018). Chromium removal from tannery wastewater using syzygium cumini bark adsorbent. International Journal of Environmental Science and Technology, 16(3): p. 1395-1404.eng
dc.relation.referencesSethunathan, N.; Megharaj, M.; Smith, L.; Kamaludeen, S. P. B.; Avudainayagam, S.; Naidu, R. (2005). Microbial role in the failure of natural attenuation of chromium(VI) in long-term tannery waste contaminated soil. Agriculture, Ecosystems & Environment, 105(4): p. 657-661.eng
dc.relation.referencesNational center for Biotechnology information. (2020). PubChem Database/Chromium. Acceso el 25 de marzo de 2020. Disponible en https://pubchem.ncbi.nlm.nih.gov/compound/Chromium.eng
dc.relation.referencesThe Royal Society of Chemistry. (2014). Heavy metals in water presence, removal and safety. Jaipur-India. p. 380.eng
dc.relation.referencesWang, G.; Hua, Y.; Su, X.; Komarneni, S.; Ma, S.; Wang, Y. (2016). Cr(VI) adsorption by montmorillonite nanocomposites. Applied Clay Science, 124-125: p. 111-118.eng
dc.relation.referencesUMPE - Unidad de Planeación Minero Energetica. (2018). Cromo: Caracterización y análisis de mercado internacional de minerales en el corto, mediano, y largo plazo con vigencia al año 2035. Santiago de Chile. p. 55.spa
dc.relation.referencesYun, Y.-S.; Park, D.; Park, J. M.; Volesky, B. (2001). Biosorption of trivalent chromium on the brown seaweed biomass. Environmental Science and Technology, 35(1): p. 4353- 4358eng
dc.relation.referencesPorras, Á. C. (2010). Descripción de la nocividad del cromo proveniente de la industria curtiembre y de las posibles formas de removerlo. Revista de Ingenierías: Universidad de Medellín, 9(17): p. 41-49.spa
dc.relation.referencesLederPiel. (2018). Revista técnica de la piel y sus manufacturas. Accesso el 25 de septiembre de 2019. Disponible en http://lederpiel.com/comercio-mundial-sector- cuero-2017/.spa
dc.relation.referencesMartinez, S.; Romero, J. (2017). Revisión del estado actual de la industria de las curtiembres en sus procesos y productos: un análisis de su competitividad. Revista Facultad de Ciencias Económicas, 26(1): p. 1-12.spa
dc.relation.referencesOMS - Organización Mundial de la Salud. (2017). Guidelines for drinking water quality. p. 202.eng
dc.relation.referencesBenítez Campo, N. (2017). Realidad social, económica y ambiental de las curtiembres de El Cerrito. Primera ed., Cali, Colombia.spa
dc.relation.referencesMinambiente - Ministerio de Ambiente y Desarrollo Sostenible de Colombia. (2015). Resolución 631 de 2015 por el cual es establecen los parámetros y valores límites máximos permisibles en vertimientos puntuales a cuerpos de aguas superficiales y a los sistemas de alcantarillado público. Bogotá D.C. p. 73.spa
dc.relation.referencesPureEarth. (2014). Tannery Operations - Chormium Pollution. Acceso el 25 de septiembre de 2019. Disponible en https://www.worstpolluted.org/projects_reports/display/80.eng
dc.relation.referencesGobernación de Nariño. (2019). Plan Departamental de extensión agropecuaria del Departamento de Nariño. San Juan de Pasto. p. 222.spa
dc.relation.referencesGreenpeace. (2012). Cueros tóxicos. Acceso el 21 de septiembre de 2019. Disponible en https://www.greenpeace.org/archive-argentina/es/informes/Cueros-toxicos/.spa
dc.relation.referencesShams, K. M.; Tichy, G.; Sager, M.; Peer, T.; Bashar, A.; Jozic, M. (2009). Soil contamination from tannery wastes with emphasis on the fate and distribution of tri- and hexavalent chromium. Water, Air, and Soil Pollution, 199(1): p. 123-137.eng
dc.relation.referencesHuman Rights Watch. (2012). Toxic tanneries:The health repercussions of Bangladesh’s Hazaribagh leather. Acceso el 23 de marzo de 2020. Disponible en https://www.hrw.org/report/2012/10/08/toxic-tanneries/health-repercussions- bangladeshs-hazaribagh-leather.eng
dc.relation.referencesRisingbd.com. (2020). ¿Es posible revivir Buriganga como el Támesis?. Acceso el 23 de marzo de 2020. Disponible en https://www.risingbd.com/english/Isnt-possible-to- revive-Buriganga-like-Thames/63022.spa
dc.relation.referencesArtuz, L. A.; Martínez, M. S.; Morales, C. J. (2008). Las industrias curtiembres y su incidencia en la contaminación del río Bogotá. Isocuanta, 1(1): p. 1-11.spa
dc.relation.referencesIDEAM - Instituto de Hidrología Meteorología y Estudios Ambientales. (2014). Estudio Nacional del Agua 2014. Bogotá D.C. p. 496.spa
dc.relation.referencesIDEAM - Instituto de Hidrología Meteorología y Estudios Ambientales. (2018). Estudio Nacional del Agua 2018. Bogotá D.C. p. 436.spa
dc.relation.referencesCORPONARIÑO - Corporación Autónoma Regional de Nariño. (2011). Plan de ordenamiento quebrada Mocondino Molinos. San Juan de Pasto. p. 20.spa
dc.relation.referencesAmbiencia - Laboratorio Ambiental. (2018). Reporte de resultados de laboratorio. Bogotá D.C. p. 3.spa
dc.relation.referencesCheng, Q.; Wang, C.; Doudrick, K.; Chan, C. K. (2015). Hexavalent chromium removal using metal oxide photocatalysts. Applied Catalysis B: Environmental, 176-177: p. 740- 748.eng
dc.relation.referencesAli, S. W.; Mirza, M. L.; Bhatti, T. M. (2015). Removal of Cr(VI) using iron nanoparticles supported on porous cation-exchange resin. Hydrometallurgy, 157: p. 82-89.eng
dc.relation.referencesMuthumareeswaran, M. R.; Alhoshan, M.; Agarwal, G. P. (2017). Ultrafiltration membrane for effective removal of chromium ions from potable water. Scientific Reports, 7: p. 41-423.eng
dc.relation.referencesUddin, M. K. (2017). A review on the adsorption of heavy metals by clay minerals, with special focus on the past decade. Chemical Engineering Journal, 308: p. 438-462.eng
dc.relation.referencesAli, I.; Asim, M.; Khan, T. A. (2012). Low cost adsorbents for the removal of organic pollutants from wastewater. Journal of Environmental Management, 113: p. 170-183.eng
dc.relation.referencesMcCabe, W.; Smith, J.; Harriott, P. (1991). Operaciones Unitarias en Ingenieria Química. cuarta ed., España. p. 1114.spa
dc.relation.referencesErsoz, M.; Barrott, L. (2012). Best practice guide on metals removal from drinking water by treatment. London UK - IWA Publishing Alliance House. p. 138.eng
dc.relation.referencesGueye, M.; Richardson, Y.; Kafack, F. T.; Blin, J. (2014). High efficiency activated carbons from African biomass residues for the removal of chromium(VI) from wastewater. Journal of Environmental Chemical Engineering, 2(1): p. 273-281.eng
dc.relation.referencesChen, H.; Yan, T.; Jiang, F. (2014). Adsorption of Cr(VI) from aqueous solution on mesoporous carbon nitride. Journal of the Taiwan Institute of Chemical Engineers, 45(4): p. 1842-1849.eng
dc.relation.referencesYang, J.; Yu, M.; Qiu, T. (2014). Adsorption thermodynamics and kinetics of Cr(VI) on KIP210 resin. Journal of Industrial and Engineering Chemistry, 20(2): p. 480-486.eng
dc.relation.referencesLiu, C.; Fiol, N.; Villaescusa, I.; Poch, J. (2016). New approach in modeling Cr(VI) sorption onto biomass from metal binary mixtures solutions. The Science of the Total Environment, 541(2): p. 101-108.eng
dc.relation.referencesRubio, D. I. C.; Calderón, R. A. M.; Acosta, D. R.; Gualtero, A. P.; Rojas, I. J. S. (2015). Tratamientos para la remoción de metales pesados comúnmente presentes en aguas residuales industriales. Ingeniería y Región, 13(1): p. 73.spa
dc.relation.referencesBabel, S.; Kurniawan, T. A. (2003). Low-cost adsorbents for heavy metals uptake from contaminated water: A review. Journal of Hazardous Materials, 97(1-3): p. 219–243.eng
dc.relation.referencesRíos, J. V.; Ortega, G. C. (2013). Predicción de las curvas de ruptura para la remoción de plomo (II) en disolución acuosa sobre carbón activado en una columna empacada. Facultad de Ingeniería Universidad de Antioquia, 66(1): p. 141-158.spa
dc.relation.referencesOliveira, R. F.; Nunes, K. G. P.; Jurado, I. V.; Amador, I. C. B.; Estumano, D. C.; Féris, L. A. (2020). Cr (VI) adsorption in batch and continuous scale: A mathematical and experimental approach for operational parameters prediction. Environmental Technology & Innovation, 20(2): p. 101.eng
dc.relation.referencesNag, S.; Bar, N.; Das, S. K. (2020). Cr(VI) removal from aqueous solution using green adsorbents in continuous bed column – statistical and GA-ANN hybrid modelling. Chemical Engineering Science, 226(1): p. 115-904.eng
dc.relation.referencesKumar, S.; Patra, C.; Narayanasamy, S.; Rajaraman, P. V. (2020). Performance of acid- activated water caltrop (Trapa natans) shell in fixed bed column for hexavalent chromium removal from simulated wastewater. Environmental Science and Pollution Research International, 27(22): p. 28042-28052.eng
dc.relation.referencesShanmugam, D.; Alagappan, M.; Rajan, R. K. (2016). Bench-scale packed bed sorption of cibacron blue F3GA using lucrative algal biomass. Alexandria Engineering Journal, 55(3): p. 2995-3003.eng
dc.relation.referencesKumari, U.; Mishra, A.; Siddiqi, H.; Meikap, B. C. (2021). Effective defluoridation of industrial wastewater by using acid modified alumina in fixed-bed adsorption column: Experimental and breakthrough curves analysis. Journal of Cleaner Production, 279: p. 123-645.eng
dc.relation.referencesMelliti, A.; Kheriji, J.; Bessaies, H.; Hamrouni, B. (2020). Boron removal from water by adsorption onto activated carbon prepared from palm bark: kinetic, isotherms, optimization and breakthrough curves modeling. Water Science and Technology, 81(2): p. 321-332.eng
dc.relation.referencesRojas-Mayorga, C. K.; Aguayo-Villarreal, I. A.; Moreno-Pérez, J.; Muñiz-Valencia, R.; Montes-Morán, M. Á.; Ocampo-Pérez, R. (2021). Influence of calcium species on SO2 adsorption capacity of a novel carbonaceous materials and their ANN modeling. Journal of Environmental Chemical Engineering, 9(1): p. 104-810.eng
dc.relation.referencesSrivastava, S.; Agrawal, S. B.; Mondal, M. K. (2020). A fixed bed column study of natural and chemically modified Lagerstroemia speciosa bark for removal of synthetic Cr(VI) ions from aqueous solution. International Journal of Phytoremediation, 22(12): p. 1233-1241.eng
dc.relation.referencesApiratikul, R.; Chu, K. H. (2021). Improved fixed bed models for correlating asymmetric adsorption breakthrough curves. Journal of Water Process Engineering, 40: p. 101-810.eng
dc.relation.referencesVinati, A.; Mahanty, B.; Behera, S. K. (2015). Clay and clay minerals for fluoride removal from water: A state-of-the-art review. Applied Clay Science, 114: p. 340-348.eng
dc.relation.referencesNigam, M.; Rajoriya, S.; Rani Singh, S.; Kumar, P. (2019). Adsorption of Cr (VI) ion from tannery wastewater on tea waste: Kinetics, equilibrium and thermodynamics studies. Journal of Environmental Chemical Engineering, 7(3): p. 103-188.eng
dc.relation.referencesSharma, S. K. (2015). Green Chemistry for dyes removal from waste water research trends and applications. 1 ed., EE.UU. p. 492.eng
dc.relation.referencesMitra, T.; Das, S. K. (2020). Removal of Cu(II) ions using bio‐adsorbents in fixed-Bed continuous bed mode-A comparative study and scale‐up design. Environmental Progress & Sustainable Energy, 39(5).eng
dc.relation.referencesHan, S.; Zang, Y.; Gao, Y.; Yue, Q.; Zhang, P.; Kong, W.; Jin, B.; Xu, X.; Gao, B. (2020). Co- monomer polymer anion exchange resin for removing Cr(VI) contaminants: Adsorption kinetics, mechanism and performance. The Science of the Total Environment, 709(3): p. 136-202.eng
dc.relation.referencesChen, N.; Qiu, G.; Huang, C.; Liu, L.; Li, G.; Chen, B. (2019). Removal of hexavalent chromium in soil by lignin-based weakly acidic cation exchange resin. Chinese Journal of Chemical Engineering, 27(10): p. 2544-2550.eng
dc.relation.referencesWang, B.; Wan, Y.; Zheng, Y.; Lee, X.; Liu, T.; Yu, Z.; Huang, J.; Ok, Y. S.; Chen, J.; Gao, B. (2018). Alginate-based composites for environmental applications: a critical review. Critical Reviews in Environmental Science and Technology, 49(4): p. 318-356.eng
dc.relation.referencesJin, X.; Wang, H.; Jin, X.; Wang, H.; Chen, L.; Wang, W.; Lin, T.; Zhu, Z. (2020). Preparation of keratin/PET nanofiber membrane and its high adsorption performance of Cr(VI). Science of The Total Environment, 710: p. 135-546.eng
dc.relation.referencesKarnjanakom, S.; Maneechakr, P. (2019). Adsorption behaviors and capacities of Cr(VI) onto environmentally activated carbon modified by cationic (HDTMA and DDAB) surfactants. Journal of Molecular Structure, 1186: p. 80-90.eng
dc.relation.referencesSun, X.; Li, Q.; Yang, L.; Liu, H. (2016). Chemically modified magnetic chitosan microspheres for Cr(VI) removal from acidic aqueous solution. Particuology, 26: p. 79-86.eng
dc.relation.referencesAryal, M. (2019). Calcium alginate entrapped Eupatorium adenophorum Sprengel stems powder for chromium(VI) biosorption in aqueous mediums. PLoS One, 14(8): p. 213-477.eng
dc.relation.referencesOmer, A. M.; Khalifa, R. E.; Hu, Z.; Zhang, H.; Liu, C.; Ouyang, X.-k. (2019). Fabrication of tetraethylenepentamine functionalized alginate beads for adsorptive removal of Cr (VI) from aqueous solutions. International Journal of Biological Macromolecules, 125: p. 1221-1231.eng
dc.relation.referencesForoutan, R.; Zareipour, R.; Mohammadi, R. (2018). Fast adsorption of chromium (VI) ions from synthetic sewage using bentonite and bentonite/bio-coal composite: a comparative study. Materials Research Express, 6(2): p. 25-508.eng
dc.relation.referencesSetshedi, K. Z.; Bhaumik, M.; Songwane, S.; Onyango, M. S.; Maity, A. (2013). Exfoliated polypyrrole-organically modified montmorillonite clay nanocomposite as a potential adsorbent for Cr(VI) removal. Chemical Engineering Journal, 222: p. 186-197.eng
dc.relation.referencesCastro-Castro, J. D.; Macías-Quiroga, I. F.; Giraldo-Gómez, G. I.; Sanabria-González, N. R. (2020). Adsorption of Cr(VI) in aqueous solution using a surfactant-modified bentonite. The Scientific World Journal, 2000: p. ID 3628163.eng
dc.relation.referencesWeng, C. H.; Sharma, Y. C.; Chu, S. H. (2008). Adsorption of Cr(VI) from aqueous solutions by spent activated clay. Journal of Hazardous Materials, 155(1-2): p. 65-75.eng
dc.relation.referencesKurian, M.; Kavitha, S. (2016). A review on the importance of pillared interlayered clays in green chemical catalysis. IOSR Journal of Applied Chemistry: p. 47–54.eng
dc.relation.referencesGopalakannan, V.; Periyasamy, S.; Viswanathan, N. (2016). Synthesis of assorted metal ions anchored alginate bentonite biocomposites for Cr(VI) sorption. Carbohydrate polymers, 151(1): p. 1100-1109.eng
dc.relation.referencesTzu, T. W.; Tsuritani, T.; Sato, K. (2013). Sorption of Pb(II), Cd(II), and Ni(II) toxic metal ions by alginate-bentonite. Journal of Environmental Protection, 04(01): p. 51-55.eng
dc.relation.referencesMacías-Quiroga, I. F.; Giraldo-Gómez, G. I.; Sanabria-González, N. R. (2018). Characterization of Colombian clay and its potential use as adsorbent. Scientific World Journal, 2018: p. ID 5969178.eng
dc.relation.referencesGómez, J. A. C.; Arango, C. M. C., (2004). Definición de zonas potenciales para esmectitas en los Departamentos del Valle del Cauca, Tolima y Caldas. Instituto Colombiano de Geología y Mineria (Ingeominas): Bogotá, Colombia. p. 1–219.spa
dc.relation.referencesViseras, C.; Aguzzi, C.; Cerezo, P.; Bedmar, M. C. (2013). Biopolymer–clay nanocomposites for controlled drug delivery. Materials Science and Technology, 24(9): p. 1020-1026.eng
dc.relation.referencesBelhouchat, N.; Zaghouane-Boudiaf, H.; Viseras, C. (2017). Removal of anionic and cationic dyes from aqueous solution with activated organo-bentonite/sodium alginate encapsulated beads. Applied Clay Science, 135: p. 9-15.eng
dc.relation.referencesRatkievicius, L. A.; Cunha Filho, F. J. V. D.; Barros Neto, E. L. D.; Santanna, V. C. (2017). Modification of bentonite clay by a cationic surfactant to be used as a viscosity enhancer in vegetable-oil-based drilling fluid. Applied Clay Science, 135: p. 307-312.eng
dc.relation.referencesHouhoune, F.; Nibou, D.; Chegrouche, S.; Menacer, S. (2016). Behaviour of modified hexadecyltrimethylammonium bromide bentonite toward uranium species. Journal of Environmental Chemical Engineering, 4(3): p. 3459-3467.eng
dc.relation.referencesAnirudhan, T. S.; Ramachandran, M. (2015). Adsorptive removal of basic dyes from aqueous solutions by surfactant modified bentonite clay (organoclay): Kinetic and competitive adsorption isotherm. Process Safety and Environmental Protection, 95: p. 215-225.eng
dc.relation.referencesPicasso, G.; Sun Kou, M. d. R. (2008). Aplicaciones tecnológicas de las arcillas modificadas. Revista de la Sociedad Química del Perú, 74: p. 57-74.spa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.rights.licenseReconocimiento 4.0 Internacionalspa
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/spa
dc.subject.ddc660 - Ingeniería químicaspa
dc.subject.lembCromo hexavalentespa
dc.subject.lembChromium Hexavalenteng
dc.subject.lembCarbón activadospa
dc.subject.lembActivated carboneng
dc.subject.proposalAdsorciónspa
dc.subject.proposalCromospa
dc.subject.proposalCurtiembrespa
dc.subject.proposalBentonitaspa
dc.subject.proposalAlginatospa
dc.subject.proposalAdsorptioneng
dc.subject.proposalChromiumeng
dc.subject.proposalTanneryeng
dc.subject.proposalBentoniteeng
dc.subject.proposalAlginateeng
dc.titleAdsorción de cromo hexavalente en solución acuosa empleando un compósito organoarcilla-alginato y su potencial aplicación en un efluente de curtiembre: caso de estudio municipio de Belén-Nariñospa
dc.title.translatedAdsorption of hexavalent chromium in aqueous solution using an organoclay-alginate composite and its potential application in a tannery effluent: a case study in the municipality of Belén- Nariñoeng
dc.typeTrabajo de grado - Maestríaspa
dc.type.coarhttp://purl.org/coar/resource_type/c_bdccspa
dc.type.coarversionhttp://purl.org/coar/version/c_ab4af688f83e57aaspa
dc.type.contentImagespa
dc.type.contentTextspa
dc.type.driverinfo:eu-repo/semantics/masterThesisspa
dc.type.versioninfo:eu-repo/semantics/acceptedVersionspa
dcterms.audience.professionaldevelopmentEstudiantesspa
dcterms.audience.professionaldevelopmentInvestigadoresspa
dcterms.audience.professionaldevelopmentPúblico generalspa
oaire.accessrightshttp://purl.org/coar/access_right/c_abf2spa

Archivos

Bloque original

Mostrando 1 - 1 de 1
Cargando...
Miniatura
Nombre:
1085938630.2021.pdf
Tamaño:
6.24 MB
Formato:
Adobe Portable Document Format
Descripción:
Tesis de Maestría en Ingeniería - Ingeniería Ambiental

Bloque de licencias

Mostrando 1 - 1 de 1
Cargando...
Miniatura
Nombre:
license.txt
Tamaño:
3.98 KB
Formato:
Item-specific license agreed upon to submission
Descripción: