Automatización para la calibración de temperatura usando el puente termométrico ASLF700
Type
Trabajo de grado - Maestría
Document language
EspañolPublication Date
2018-01-31Metadata
Show full item recordSummary
Este documento describe el proceso de automatización para la calibración metrológica de temperatura en función de la Resistencia usando el método de comparación con el puente termométrico ASL F700. Se desarrollo una caracterización del puente termométrico ASL F700 obteniendo el análisis de los parámetros para la calibración, adicionalmente se desarrolló un software para la adquisición de datos y el cálculo de la temperatura de acuerdo al Estandar Internacional en temperatura ITS-90. Teniendo en cuenta, que para garantizar la trazabilidad se realizó la automatización de la calibración del ASL F700 usando el patrón de puentes termométricos RBC 100 A/M. Finalmente dicho procedimiento será evaluado mediante un proceso estadístico realizando el Aseguramiento metrológico al patrón. La programación está desarrollada en ambiente LabVIEW, con el propósito de la realización una interfaz única y dinámica para los usuarios que utilizan este proceso para la calibración en Temperatura y la calibración del Puente Termométrico ASL F700.Summary
Abstract: This document describes the automation process for metrological calibration of temperature according to the Resistance, using the comparison method with the ASL F700 thermometric bridge standard. The characterization of the ASL F700 thermometric bridge standard was developed obtaining the analysis of the parameters for the calibration, additionally a softwa- re was developed for the data acquisition and the calculation of the temperature according to the International Standard of ITS-90 temperature. Taking into account that to ensure traceability, the automation of the calibration of the ASL F700 was performed using the RBC 100 A / M thermometric bridge standard. Finally, this procedure is evaluated with a statistical process to performing the metrological assurance to the standard. The program- ming task was developed in LabVIEW environment, with the purpose of realizing a unique and dynamic interface for the users that use the process of calibration in Temperature and the calibration of the ASL F700 Thermometric Bridge standard.Keywords
Collections
