Caracterización petrofísica del Grupo Real como potencial acuífero, en un área del sector centro - norte del Valle Medio del Magdalena, Colombia

Cargando...
Miniatura

Autores

Camargo Rache, Germán Leonardo

Document language:

Español

Fecha

Título de la revista

ISSN de la revista

Título del volumen

Documentos PDF

Resumen

El estudio del potencial hídrico subterráneo del Grupo Real en un sector centro norte de la cuenca del valle medio del Magdalena, se llevó a cabo a partir de la construcción de un modelo estratigráfico y litológico en 3D, elaborado a partir de información de 5 líneas sísmicas, 32 pozos de hidrocarburos y tres columnas estratigráficas de campo, en donde se identificaron cuatro unidades operativas en el Grupo Real, nombradas de base a techo GR1, GR2, GR3 y GR4. Mediante el procesamiento y análisis de registros resistivos, acústicos y nucleares de pozos de hidrocarburos, se estimaron parámetros petrofísicos de interés hidrogeológico como el volumen de arcilla, la porosidad efectiva y la salinidad. El volumen de arcilla se calculó en 24 pozos, identificando las unidades GR2, GR3 y GR4 con mayor potencial acuífero, con valores en la mediana de 44,7%, 44,6% y 57,9% de areniscas respectivamente, mientras que para la unidad GR1 se calculó una mediana de 29,6 % de areniscas, por lo que esta última unidad se clasificó como un acuitardo. La porosidad efectiva fue calculada en los mismos pozos donde se calculó el volumen de arcillas, mediante el método de arcillas laminadas, generando un modelo 3D de porosidad con valores intercuartiles entre 6% y 18%, identificando valores ligeramente más altos en las unidades operativas GR2 y GR4. Hacia el suroccidente aumenta la porosidad en las unidades GR2, GR3 Y GR4, relacionado con un aumento de facies arenosas al igual que hacia el nororiente en la unidad GR4, relacionado con la presencia de conglomerados, con valores entre 18% y 26%. La salinidad del agua subterránea se calculó en 20 pozos mediante el método de resistividad - porosidad, a partir de los cuales se generó el modelo 3D de salinidad, donde se identificó que, hacia el centro oriente del área de estudio en la unidad operativa GR1, se presenta agua altamente salobre a salada, hacia el occidente disminuye la salinidad de esta unidad de ligera a moderadamente salobre. En la unidad GR2 se presenta agua moderada a altamente salobre hacia el centro oriente, que disminuye hacia el noroccidente a ligeramente salobre, por lo que se identificó una zona de recarga de aguas meteóricas hacia el occidente, en donde aflora el Grupo Real. La unidad GR3 en general presenta aguas ligeramente salobres y la unidad GR4 aguas dulces, por lo tanto según la resolución 90341 del ministerio de minas y energía, el agua subterránea de estas dos últimas unidades debe tener un uso potencial para consumo humano y la unidad GR2 hacia el centro oriente del área de estudio, podría tener un uso industrial como perforación, inyección y fracturamiento hidráulico, entre otras, ya que se observan aguas con salinidades por encima de los 4.000 ppm de SDT (Texto tomado de la fuente).

Abstract

The study of groundwater potential of the Real Group in a north central sector at the Middle Magdalena Valley basin is carried out based on the construction of a 3D stratigraphic and lithological model, prepared from 5 seismic lines, 32 hydrocarbon wells and three field stratigraphic columns. In the geological model, four operational units were identified in the Real Group, named from base to top GR1, GR2, GR3 and GR4. Through the processing and analysis of resistivity, acoustic and nuclear logs from hydrocarbon wells, petrophysical parameters of hydrogeological interest such as clay volume, effective porosity and salinity were estimated. The clay volume was calculated in 24 wells, identifying the GR2, GR3 and GR4 units with the highest hydrogeological potential, with median values of 44.7%, 44.6% and 57.9% sandstone respectively, while for The GR1 unit was calculated to have a median of 29.6% sandstone, so this last unit was classified as an aquitard. The effective porosity was calculated in the same wells where the volume of clays was calculated, using the laminated clays method, generating a 3D porosity model with interquartile values between 6% and 18%, identifying slightly higher values in the GR2 and GR4 operational units. Towards the southwest, porosity increases in units GR2, GR3 and GR4, related to an increase in sandy facies, as well as toward the northeast in unit GR4, related to the presence of conglomerates, with values between 18% and 26%. The salinity of the groundwater was calculated in 20 wells using the resistivity - porosity method, from which the 3D salinity model was generated, where it was identified that, towards the center-east of the study area in the operational unit GR1, highly brackish to salty water is present, towards the west the salinity of this unit decreases from slightly to moderately brackish. In the GR2 unit there is moderate to highly brackish water towards the central east, which decreases towards the northwest to slightly brackish, so a recharge zone of meteoric waters was identified towards the west, where the Real Group crops out. The GR3 unit generally presents slightly brackish waters and the GR4 unit fresh waters, therefore according to resolution 90341 of the Ministry of Mines and Energy, the groundwater of these last two units must have potential use for human drinking water and the GR2 unit towards the central east of the study area, it could have industrial use such as drilling, injection and hydraulic fracturing, among others, since waters with salinities above 4,000 ppm of TDS are observed.

Descripción

ilustraciones, diagramas, mapas

Palabras clave

Citación