Preparación y caracterización de sistemas Au/MO2 (M = Zr, Ce) para la oxidación de glicerina
Cargando...
Archivos
Autores
Ochoa Quintero, Johannys José
Director
Tipo de contenido
Document language:
Español
Fecha
Título de la revista
ISSN de la revista
Título del volumen
Documentos PDF
Resumen
La presente tesis de maestría se enfoca a la preparación de sistemas Au/MO2 (M = Zr, Ce), a la determinación de sus propiedades estructurales, texturales y superficiales y a la aplicación de estos sistemas como catalizadores en la oxidación selectiva de glicerina. Los sistemas materiales Au/MO2 (M = Zr, Ce) se obtuvieron por impregnación incipiente de soportes basados en óxido de cerio (IV) u óxido de circonio (IV) de altas áreas específicas. Estos soportes se prepararon por tratamiento hidrotérmico de óxidos hidratados del metal a partir de una disolución de nitrato del metal, ajustada con amoniaco. El sistema ácido acrílico– glucosa demostró ser un efectivo agente promotor de mesoporosidad y áreas específicas extensas en la síntesis hidrotérmicas de los soportes basados en los óxidos metálicos y CeO2. Los soportes basados en los óxidos metálicos ZrO2 y CeO2, exhiben áreas superficiales entre 142 y 203 m2 g
Abstract. This thesis focuses on the preparation and determination of structural, surface and textural properties of material systems Au/MO2 (M = Zr, Ce) in order to apply them as catalysts in selective oxidation of alcohols and glycols. The acrylic acid-glucose system proved to be an effective mesoporosity and high surface areas promoter in the hydrothermal synthesis of supports based on metal oxides ZrO2 and CeO2. Supports based on ZrO2 and CeO2exhibit surface areas between 142 and 203 m2 g
Abstract. This thesis focuses on the preparation and determination of structural, surface and textural properties of material systems Au/MO2 (M = Zr, Ce) in order to apply them as catalysts in selective oxidation of alcohols and glycols. The acrylic acid-glucose system proved to be an effective mesoporosity and high surface areas promoter in the hydrothermal synthesis of supports based on metal oxides ZrO2 and CeO2. Supports based on ZrO2 and CeO2exhibit surface areas between 142 and 203 m2 g